EEW 6.0 Motor

Description

This is a replacement motor for the EEW 6.0 and EEW Cone Winder.

This motor is not compatible with certain EEW 6.1 units due to differences in the motor pulley. Check your EEW 6.1 unit—if your EEW 6.1 pulley has a flat edge on the center hole, this motor will not fit without modification. We recommend purchasing the EEW Brushless Motor instead. 

To replace the motor:
Use the wrench (included) to loosen and remove the motor pulley. Using a Phillips screwdriver, remove the two mounting screws, which hold the motor in place. Unplug the motor, install the replacement and reassemble.

Watch this video for how to instructions for motor replacement on your EEW 6.0.