EEW Brushless Motor

Description

This is a replacement motor for the EEW 6.1, EEW Fold, EEW Cone Winder, and EEW 6.0.  It is the v4500 version of our brushless motor.

To replace this you can use the included wrench to loosen the motor pulley.   After taking off the motor pulley use a Philips screwdriver to remove the two screws holding the motor in place.  Then unplug the motor and install your new motor.

Here is a video that shows how to install the EEW 6.1 motor.  Replacing it on other EEW products is very similar.