EEW Nano 2.1 Motor

Description

This is a replacement motor for the EEW Nano 2.1 and EEW Nano 2.0.

To replace the motor:
Use a small Phillips screwdriver to unscrew the motor. Pull the pulley off,and plug in the new motor.

EEW Nano 1.0 and 1.1 notes:
If you want to replace the motor in the EEW Nano 1.x you can use this motor, but you will also need to replace the circuit board with an EEW Nano 2.1 Circuit Board from this store.  You also need a USB micro plug with 1A or more to power this. If you have the EEW Nano 1.0 you will also need to drill new holes in the plastic case to fit this slightly larger motor.