3.5mm Splitter Cable

This is a 3.5mm splitter cable. It is used to control multiple cameras or flashes from a single port on the Camera Axe. All the flashes/cameras plugged into a single port will get triggered at the same time. This is extremely useful if you have two or more flashes to help soften the shadows that normally occur from a single flash.

You plug the male end into the Camera Axe and two cameras/flashes into the female ends. You can daisy-chain these together to support even more devices.

Another use is you could use two of these cables two lasers, and two light sensors to build a cross laser sensor to capture insects in flight. It would be a cheaper way to build something like this.