Product Image
Item Name
Price+
This is used to pay for custom orders. You should be in contact with us before using this and you should have our written instructions to use this....
$1.00
This is a 3.5mm extension cable. Very useful when you want to extend the range of your camera/flash cable or sensor cable on the Camera Axe by 6ft.
$4.00 Add:
This is a 3.5mm extension cable. Some flashes have a 3.5 mm port and for those flashes this could be used as a flash cable. Using a high voltage...
$4.00 Add:
This is a 3.5mm splitter cable. It is used to control multiple cameras or flashes from a single port on the Camera Axe. All the flashes/cameras...
$5.00 Add:
This is the Atmel 168. This chip comes pre-programmed with the latest version of the Camera Axe software. You can buy this chip if the one that...
$10.00 Add:
This cable, which plugs into either of the Camera/Flash ports on the Camera Axe, triggers Cannon cameras that have the "C1" plug. This plug is just a...
$15.00 Add:
This PC Sync cable, which plugs into either of the Camera/Flash ports on the Camera Axe, lets you attach a flash to the Camera Axe for high speed...
$15.00 Add:
This cable, which plugs into either of the Camera/Flash ports on the Camera Axe, triggers Cannon cameras that have the "C3" plug. Check the photos...
$20.00 Add:
This laser, which plugs into either of the Sensor ports on the Camera Axe, isn't really a sensor. All it does is create a laser beam of light. It...
$20.00 Add:
This light sensor, which plugs into either of the Sensor ports on the Camera Axe, detects the light level. It is quite sensitive and works great at...
$20.00 Add:
This microphone sensor, which plugs into either of the Sensor ports on the Camera Axe, detects moderate to loud sounds. It easily detects guns,...
$20.00 Add:
This cable, which plugs into either of the Camera/Flash ports on the Camera Axe, triggers Nikon cameras that have the "N1" plug (has 10 pins). Check...
$20.00 Add:
This cable, which plugs into either of the Camera/Flash ports on the Camera Axe, triggers Nikon cameras that have the "N2" plug. Check the photos to...
$20.00 Add:
This cable, which plugs into either of the Camera/Flash ports on the Camera Axe, triggers Nikon cameras that have the "N3" plug. Check the photos to...
$20.00 Add:
This cable, which plugs into either of the Camera/Flash ports on the Camera Axe, triggers Olympus cameras that have the "Multipin" plug. Check the...
$20.00 Add:
This photogate sensor, which plugs into either of the Sensor ports on the Camera Axe, detects when something passes between the gate. Great for...
$20.00 Add:
This cable, which plugs into either of the Camera/Flash ports on the Camera Axe, triggers Sony cameras that have the "S1" plug. Check the photos to...
$20.00 Add:
Plug this into a 120 VAC 60 Hz plug and the other end into the Camera Axe where you normally use a battery. No longer are you limited by the life of...
$20.00 Add:
This cable loads new firmware onto Camera Axe. To use this cable you need to remove four Philips screws on the back of Camera Axe and then just plug...
$21.00 Add:
This flash hotshoe, which plugs into either of the Camera/Flash ports on the Camera Axe, lets you attach a flash to the Camera Axe for high speed...
$25.00 Add:
This motion sensor, which plugs into either of the Sensor ports on the Camera Axe, detects movement from hand sized objects and larger. Great for...
$25.00 Add:
This is our favorite sensor and really does seem magical. You can precisely position a bullet (or any other fast moving object) anywhere in your...
$45.00 Add:
This sensor is designed to take droplet splash pictures. It makes photographing colliding milk droplets easy. It has a valve that makes droplets at...
$45.00 Add:
This is the kit version of the Camera Axe. Here is the build guide with the parts list and build instructions. Read these instructions carefully to...
$95.00 Add:
The Camera Axe is a tool for photographers to trigger cameras or flashes based signals from various sensors. There are two ports for sensors such as...
$195.00 Add: