Product Image
Item Name- Price
The Camera Axe is a tool for photographers to trigger cameras or flashes based signals from various sensors. It is useful for catching phenomena that...
$185.00
This is the shield kit version of the Camera Axe. It plugs into an Arduino Uno (not included). While this shield version doesn't have a fancy case,...
$85.00
This sensor is designed to make photographing liquid droplets and even colliding droplets easy. The Camera Axe precisely controls the valve in this...
$45.00
This is our favorite sensor and really does seem magical. You can precisely position a bullet (or any other fast moving object) anywhere in your...
$45.00
This cable plugs into either of the Camera/Flash ports on the Camera Axe. It works with and cameras with the Canon "C3" plug. Check the photos to...
$19.00
This cable plugs into either of the Camera/Flash ports on the Camera Axe. It works with and cameras with the 2.5 mm stereo trigger plug. Check the...
$19.00
This cable plugs into either of the Camera/Flash ports on the Camera Axe. It works with and cameras with the "N1" plug (has 10 pins). Check the...
$19.00
This cable, which plugs into either of the Camera/Flash ports on the Camera Axe, triggers Nikon cameras that have the "N2" plug. Check the photos to...
$19.00
This cable plugs into either of the Camera/Flash ports on the Camera Axe. It works with and cameras with the Nikon "N3" plug. Check the photos to see...
$19.00
This cable plugs into either of the Camera/Flash ports on the Camera Axe. It works with and cameras with the Sony "S1" plug. Check the photos to see...
$19.00
This cable plugs into either of the Camera/Flash ports on the Camera Axe. It works with and cameras with the Olympus "Multipin" plug. Check the...
$19.00
This flash hotshoe, which plugs into either of the Camera/Flash ports on the Camera Axe, lets you attach a flash to the Camera Axe for high speed...
$25.00
This PC Sync cable, which plugs into either of the Camera/Flash ports on the Camera Axe, lets you attach a flash to the Camera Axe for high speed...
$15.00
This is a 3.5mm extension cable. Some flashes have a 3.5 mm port and for those flashes this could be used as a flash cable. Using a high voltage...
$4.00
This board plugs into the one of the Camera Axe's Camera/Flash ports and replicates that signal to up to 4 more devices. Normally that would be 4...
$40.00
This microphone sensor, which plugs into either of the Sensor ports on the Camera Axe, detects moderate to loud sounds. It easily detects guns,...
$20.00
This light sensor, which plugs into either of the Sensor ports on the Camera Axe, detects the light level. It is quite sensitive and works great at...
$20.00
This laser, which plugs into either of the Sensor ports on the Camera Axe, isn't really a sensor. All it does is create a laser beam of light. It...
$20.00
This sensor, which plugs into either of the Sensor ports on the Camera Axe, detects the distance of an objects from the sensor. It updates it's...
$45.00
This photogate sensor, which plugs into either of the sensor ports on the Camera Axe, detects when something passes between the gate. Great for...
$20.00
This Camera Shutter Sync sensor, which plugs into either of the sensor ports on the Camera Axe, detects when the shutter of your camera is open. To...
$25.00
This Clip sensor, which plugs into either of the sensor ports on the Camera Axe, is a generic sensor for people who want to make their sensor. This...
$25.00
This lets you plug the Camera Axe 5 into the wall. It supports 100 VAC to 240VAC. This will work around the world, but you will still need one of...
$15.00
This is a 3.5mm extension cable. Very useful when you want to extend the range of your camera/flash cable or sensor cable on the Camera Axe by 6ft.
$4.00
This is a 3.5mm splitter cable. It can be used to split out a power signal for the laser on the same port being used for a light sensor to make a...
$5.00
This is the Atmel 328. This chip comes pre-programmed with the latest version of the Camera Axe 5 software. You can buy this chip if the one that...
$10.00
You plug this into the power plug on the Camera Axe Shield and then clip it onto an external battery. The external battery should be 9V-12V. This is...
$15.00
This mirror can be used to reflect a laser beam so the laser sensor and light sensor can be co-located next to each other while making a laser beam...
$10.00
With this sensor plugged into a sensor port you can control a motor with the Camera Axe. You can use this with either sensor port. Currently there...
$55.00
This is used to pay for custom orders. You should be in contact with us before using this and you should have our written instructions to use this....
$1.00
